you find your hand piece in poor shape?

View previous topic View next topic Go down

you find your hand piece in poor shape?

Post by haldishenrry on Wed Sep 03, 2014 4:05 am

It is quite common that you find your hand piece in poor shape. As you know that it is one of the most important equipments on your table, so is always on the end to receive a good share of wear and tear.

The critical aspect here is not its bad working condition but how you retune it back or repair it such that it starts working the way you want it to be. Yes, the way we do our dental hand piece repairs determines how well it would work or you can even say for how much time it would be capable to do it effectively. Many times I see dentists using quite inappropriate methods when it comes to repairs which make the hand piece even worse.

Things you need to take Care:Hand Piece is very sensitive instrument and needs thorough cleaning. apex locator To do the same first remove the back cap, turbine and O rings from the head. After removing all such components clean it properly. Don't be impatient while dismantling it. The cleaning should be done gently yet in an assertive manner. For all this you don't need any specific products. Warm water and a soft toothbrush would just be fine. Before reassembling make sure that you had wiped them well with a dry cloth as otherwise it might lead to moisture deposits inside.

Many times there might be corrosion deposits inside which happen due to autoclaving. Remove all such deposits by gently rubbing it with the brush you have. Can use alcohol for such purposes, if things manula brushing don't turn effective.Never Use Detergents or soaps here as it would weaken the capability of lens and bearings. This would ultimately affect the life of your hand piece. I know you want your hand piece running all well while you use brasseler diamond burs on your patient.

When it comes to maintenance running down a few drops of oil from the air hole would be magical for your equipment. Regular oiling keeps your bearings in good shape. Before lubrication, make sure that you have read your hand piece's instructional manual as there are some bearings that don't require any kind of oiling.It might be possible that you might not be able to do all such work yourself. In that case it is always a good idea to go for professional repair services.To find them the best option is to search online. There are numerous providers that offer such maintenance and repair facilities through their web portal.

haldishenrry

Number of posts : 21
Registration date : 2014-06-09

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum